PVC South Africa Supplies our clientele with detailed Instructions to install the PVC Ceiling Panels, for a quick and stress free procedure, just follow the following instructions to install you PVC Ceiling Panels:
PVC South Africa supplies our clientele with detailed Instructions to install the PVC Ceiling Panels, for a quick and stress free procedure, just follow the following instructions to install you PVC Ceiling Panels:
- Make sure your brandering is 500mm maximum apart.
- Line brandering up, level or horizontal.
- PVC ceiling panels can be installed onto 38mm x 38mm wooden brandering with screw, nail or staple gun. Steel brandering can also be used. Drill a 3.5mm hole into the brandering – then screw a 4.5mm x 15mm screw into it.
- Screw your PVC Ceiling panel onto the brandering. The panels must lay in the same direction as the main trusses.
- Make sure the screw head fasten properly and flush with the groove of ceiling panel.
- Clip the second panel with the tongue onto the groove of first panel.
- Knock panel at side to secure close fitment. (Use your hand palm)
- Do not carry on until the panel is fitted correctly.
- When at the end of the room, cut the panel in the length with a carpet knife to fit the last peace.
- Close the corners with Cornice
- Dust ceiling with a cloth after fitment is done.
We can offer you the PVC Ceilings Prices you are looking for, as well as provide you with PVC Ceiling Installation advice! Contact PVC Ceiling Panels on: www.pvcsa.co.za to find out more about we can offer you.
